R3GUL4T0R ("Regulator") comp for Glonk

The Regulator is a DMLS 6061 aluminum screw-and-clamp style comp with an exterior profile designed to compliment the slide of the host weapon. This one has been a long time coming, as the internal geometry, specific material requirements and the transverse screw mounting system are advanced beyond the capabilites of most printing shops.

We finally got a first article printed, but I personally didnt like the way that it was going together, so I revised the geometry slightly. This second batch of test articles is on the way, and due to the service bureau's minimum-print size, there are now extras.

What is needed:

There is one (1) spare regulator for the RXM profile. You must have a stock Ruger RXM slide, a threaded (1/2x28) barrel, a reduced power (we went with 13lbs) op-rod spring, and non-communist state and local regulations to ride this ride. Once we have confirmed function, This device will go to the first person to provide us with $75 monies. It will ship in the white (thats bare metal) unless you'd like cerakote, which we will arrange seperately.

There might be a G43X version available (one is spoken for) if it survives the testing process, the same rules as above apply. You must have a stock G43X and a reduced-power op-rod spring or it will not run.

If this project interests you and you have another slide profile for us to try (e.g. PSA Dagger), let us know and we will work with you. We spend all of our money on hookers and blow, so we might need to borrow a host weapon if you want something truly ridiculous.